What sets the Hydralift Power Strap Tie Downs apart from other Tie Downs?

While the trend in our industry is to import cheaper, inferior webbing products from other countries, Hydralift supports the USA and manufactures all webbing with 100% first quality yarns in Easley, South Carolina. In addition, D.O.T. is the only manufacturer of F.A.A. approved cargo straps.

HL2608 Non-Scratch Power Strap with Twice the Strength!

All Hydralift Tiedowns meets or exceeds all standards and guidelines set by the US Dept of Transportation (DOT), Commercial Vehicle Safety Alliance (CVSA), and the Web Sling and Tie Down Assoc. (WSTDA).

• 2,500 Lb ASSEMBLY STRENGTH
• 883 Lb WORKING LOAD LIMIT
• 3,500 Lb INDUSTRIAL WEBBING
• 3,300 Lb RATCHET STRENGHT  

Capacity Ratings:

Breaking Strength Capacity:
The minimum load a component or assembly will withstand before failure. Remember, all assemblies are only as strong as the weakest component used to make them.

Working Load Limit:
The maximum load capacity that any given component or assembly should be subjected to during use. Hydralift highly recommends the "working load limit" does not exceed one third (1/3) the "breaking strength capacity" of the component or assembly being used. Working load limits shown on this website are rated at one third of the minimum breaking strength (for example, a strap rated at 6,000 lbs would have a working load limit of 2,000 lbs).

Rated Load Capacity:
Ratings are generally established and/or regulated by industry or legislative standards and may vary from industry to industry. It is the owner's and user's responsibility to determine suitability of a product for any particular use. It is recommended that all applicable industry, trade association, federal, state and local regulations are adhered to. Read all operating instructions and warnings carefully. All ratings shown on this website are based on the product being new and used in normal environmental conditions. All products should be inspected regularly. Any worn, deformed, misused or overloaded products should be replaced immediately

When securing your motorcycle never use a worm type tie down, they can become loose while traveling and have poor dependability qualities.   Use only a ratchet type tie down shown below.   Hydralift now offers a superior quality ratchet tie down,  with a built in soft extension and twice the strength of most other brands of tie downs.