Trike Lift Install

Installation and Reinforcement

 

Hydralift RV Motorcycle Lift mounting saddles are installed from under the body then up to maximum ground clearance height.Modified Install for the Hydralift Trike Carrier Lift 

The Hydralift frame mounting saddles provide the strongest and most stable mounting available but when installing the Hydralift Trike Carrier Lift we also attach a third contact point to your stock trailer hitch receiver as a third point safety.  The Hydralift frame mounting saddle brackets can be installed in many different ways to satisfy your own particular installation without compromising valuable ground clearance.

With the custom mounted saddle brackets supplied with every Hydralift RV mounted motorcycle lift you are not limited to only one type of install.

All Hydralift’s RV mounted motorcycle lifts are bolted in place and can easily removed if you wish to remove the lift from your coach for the season or wish to transfer the lift to another coach. 

The Hydralift RV Motorcycle Lift mounting saddle installed thru the fiberglass body.

 

Hydralift Saddle Brackets

The Hydralift installation saddle brackets are custom cut to fit any type of RV applications.

Once the saddle brackets are installed the RV mounted motorcycle lift is placed on the now installed saddles and the lift is then bolted into place.

If you wish to remove your Hydralift it is a snap with Hydralift's easy to use installation saddles, you simply lower the RV mounted motorcycle lift to the ground then remove the 4 bolts to each of the two mounting saddles and drive the RV away*.

 

 

Bolt Together Saddles

Hydralift's convenient bolt together saddles are easier and faster to use than a typical receiver type install.

Have you ever tried to remove something that had 2 or 3 fixed receivers that weights 300-500 lbs or how about a more difficult challenge try re-installing the lift, now what if one receiver does not align perfectly.

Your solution, use the Hydralift RV mounting saddles you can be inches off and the lift will still align.

 

 * removal is general and may vary depending on each installation


Testimonial

Hydralift RV motorcycle lift installed on a 2005 Travel Supreme January 19th 2005 bought the lift and the coach the lift was installed by Cliffs Welding in Mesa Arizona. We have hauled my bike about 2,500 miles, I did not know until now she folds up, It is very cool. Thanks for your help.

Barry C., South Carolina ,


Testimonial

I have hauled my 2001 Goldwing on the Hydralift behind my 2001 Dutch Star for several thousand miles so far with no problems. I can load and unload the bike solo (probably one of the most important features to me.) Tie-down is easy and the easy roll on and roll off at ground level is great. Additionally Hydralift being a self contained lift and the automatic locking system are a few more of the great benefits of the Hydralift motorcycle lift. Thank you,

Ed P., Texas, 2001 Dutch Star by Newmar